Basic Network Configuration PT Activity

Click Top

Overview

This is a beginning network configuration activity in Packet Tracer 6.1. This activity is designed to challenge you with some basic Cisco IOS configurations using a Cisco 1941 router, two Cisco Catalyst 2960 switches, a TFTP server and two PCs. In this Packet Tracer activity you are asked to configure the following items:

Click 1

Step 1. Assign IPv4 addresses, subnet masks and default gateways to PC-A, PC-B, and Server1

Click2

Step 2. Configure the router with the following settings:
– hostname: R1
– console password: cisco
– vty 0-to-4 password: cisco
– enable secret: class
– banner message of the day: Unauthorized access is not allowed!
– encrypt all passwords
– configure Gigabit Ethernet interfaces with:
— IPv4 addresses,
— subnet masks,
— descriptions (LAN-Management, LAN-Student)
— bring-up the interfaces
– save the running configuration

Click3

Step 3. Configure each switch with the following settings:
– hostname: S1, S2
– console password: cisco
– vty 0-to-15 password: cisco
– enable secret: class
– banner message of the day: Unauthorized access is not allowed!
– encrypt all passwords
– configure interface VLAN 1 with:
— IPv4 address,
— subnet mask,
— bring-up the interface
– default gateway IPv4 address
– save running configuration

Step 4. Copy the IOS and startup-config file on R1, to the Server1 TFTP server.

Basic Network Configuration PT Activity

Basic Network Configuration PT Activity

Download the Activity

BasicNetworkConfiguration-Activity2.zip

Comments

comments

Click Bottom